Welcome to Ponnar Precision Engineering, a company established in 2020 that specializes in the manufacturing and supplying of high-quality adhesive tapes and primers.
3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010NS
Description
Highlights
- Creates strong bond on low surface energy (LSE) plastics such as polyolefin with minimal or no surface prep required
- Delivers non-sag formulation so adhesive stays where when applied
- Resists many chemicals, water, humidity and corrosion
- Formulated to bond multi-material assemblies such as LSE plastics, thermoplastics, composites and metals
- Medium viscosity allows controlled dispensing
- 10 minute work life with 60 minute handling strength
- Strong adhesive can replace screws, rivets and welding
3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010NS is a non-sag, two-part acrylic adhesive specially formulated to bond many low surface energy plastics, including many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPEs) without special surface preparation.
When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.
Creates a Strong Bond on Low Surface Energy Plastics
Structural bonds can be achieved without special surface treatments such as chemical etching, plasma, flame, or corona treatment or priming. Simply wipe the surfaces with isopropanol to remove mold release agents, dust dirt, etc. 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010NS bonds metals, ceramics, and wood and most other plastics. The non-sag formula creates rigid adhesion. We also formulate this adhesive with 8mil spacer beads for bond line spacing.
Recommended Applications
- Joining plastics to metals, such as in the manufacture or repair of appliances
- Bonding low surface energy plastics without priming
- Impact resistance composite bonding
- Manufacture or repair of various sporting goods equipment
- Low surface energy plastics such as polypropylene, polyethylene and thermoplastic elastomers (TPEs)
3M™ Scotch-Weld ™ Acrylic Adhesive DP8010NS starts with medium viscosity for controlled dispensing and spreads to sufficiently wet out the surface. The mix ratio is 10:1 and provides a 10 minute work life. The adhesive reaches handling strength in approximately 1 hour and is fully cured in 8-24 hours (at 72° F/22° C).
Easy Adhesion with Acrylic
Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability. Often referred to as epoxy adhesives or epoxy glue, acrylics actually belong to a separate chemical family with their own unique characteristics. This very unique adhesive bonds LSE plastics without priming or other surface treatments.
Additional information
| Adhesive Type | Acrylic |
|---|---|
| Brands | Scotch-Weld™ |
| Container Size (Metric) | 208.2 Litre, 18.93 Litre, 45 ml, 490 ml |
| Design Challenges | Noise Vibration & Harshness Control NVH |
| Full Cure | 8-24 Hours @ 72 F (22 C) |
| Hardness | 60 Shore D, 55-60 Shore D |
| Indoor/Outdoor | Both |
| Industries | Metalworking, Specialty Vehicle, Woodworking, Signage, Electronics, General Industrial, Construction, Transportation, Consumer Goods, Military and Government, Medical, MRO |
| Maximum Operating Temperature (Celsius) | 66 ℃ |
| Open Time | 10 min @ 72 °F (22 °C), 10 Minutes |
| Physical Form | Flowable Liquid |
| Product Form | Gallon, Cartridge |
| Product Type | Structural Plastic Adhesive, Acrylic |
| Shear Strength at 72 Degrees F (22 Degrees C) | 2,700 psi |
| Shelf Life in Months (from date of manufacture) | 6 , 12 |
| Storage Temperature | <=40 Degree Fahrenheit |
| Storage Temperature (Celsius) | 4 °C |
| Units per Case | 1.0,12.0,6.0 |
| Viscosity | Non-sag |
| Volume (metric) | 45 mL, 490 mL |
| Work Time | 8 min |
Related products
Upcoming events
in association with Ponnar Precision Engineering, We hereby to announce the official opening of our new company. This momentous occasion marks the beginning of an exciting new chapter and we would be honored to have you join us in celebrating this exciting milestone. Make this day more special with your presence.
Address
M V Colony Layout, Royal Shelters, Stage 4, BDA Layout BTM 4th Stage, Bengaluru, Karnataka 560076.
© 2023 Ponnar Precision Engineering. All Rights Reserved. Developed by Virtual Impact.